Hostacom ERC 213N NATRL is a UV stabilised, 15 % mineral filled polypropylene copolymer for injection moulding. It combines a good flowability with excellent stiffness/impact properties. This grade is typically used for interior trim applications that require higher impact and scratch resistance requirements.
Hostacom ERC 213N NATRL
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/21.6 kg) | 18 g/10 min |
| Density (23 °C) | 1.00 g/cm³ |
| Flexural Modulus (23 °C) | 1650 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 19 MPa |
| Notched Izod Impact Strength (23 °C, Type 1, Notch A) | 40 kJ/m² |
| Notched Izod Impact Strength (-40 °C, Type 1, Notch A) | 3 kJ/m² |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 95 °C |
| Deflection Temperature Under Load (1.80 MPa, Unannealed) | 50 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications